This entry was posted in Videos and tagged APC Testing, Insertion Loss testing, OP940, Return Loss Testing, Simplex Testing. Select the Pass/Fail option to display the results color-coded based on the user-defined IL and RL pass-threshold settings. Return Loss and Insertion Loss results are displayed. Always make sure to inspect and clean if needed. Once the Return Loss is referenced, press the “Home” button to return to the dual ILRL screen.Ĭonnect your device under test, between your reference cable and detector. The unit will display the reference value and distance from the front panel to the reference point. Press the right button again and select “Start RL Ref”. Then, press the right button and select “APC Ref”. Configure the reference cables for your return loss reference, when ready, press “RL Ref”. To reference Insertion Loss, connect the reference cable to the source port and detector and select “IL Ref” and then “Start IL Ref”. If the UPS passes the Self-Test, the green On Line indicator will be lit and solid. The yellow On Battery indicator will light while the battery test is performed.

Rescan your problem devices by clicking the Assets link at the top of the web console, ticking the checkboxes in front of the devices and hitting the Rescan button on the left.In this video we demonstrate how to use the APC Reference feature on the OP940 front panel to test an APC to APC cable assembly. After pressing the button, you will observe the following events: 1.

O An IP range, by hitting the green + button next to a range in the IP Address Range Scanning section of Configuration/Scanning Setup/Scanning Methods. O An IP address, by hitting the Map Credential To One IP Address button, under Configuration/Scanning Setup/Scanning Credentials. The Global SNMP credential listed under Configuration/Scanning Setup/Scanning Credentials will be tried for all SNMP enabled devices, but all other SNMP credentials must be mapped to either: You need to map your credentials so Lansweeper knows when to use them.

Verify whether your SNMP credentials are correctly mapped.

You can create additional credentials by hitting the Add New Credential button.

Verify which SNMP credentials you’ve created in the Lansweeper web console under Configuration/Scanning Setup/Scanning Credentials.Verify what the device’s correct SNMP credential is by running the following tool on your Lansweeper server, submitting SNMP credentials and connecting to the device’s IP address:.This error indicates that a valid SNMP credential is no longer mapped to the device’s IP address or IP range.

Apc test button